How do I factory reset a Wyze Cam v3 or v4?

Press and hold the setup button on the bottom of the camera for 10 seconds, per Wyze's own support documentation. On the Battery Cam Pro, that same setup button sits inside the battery compartment — pop it open first. Hold until the status light turns solid yellow, then wait; the light starts flashing yellow and blue once the reset completes and the camera is ready to set up again as new. Wyze says to allow up to 5 minutes for the full process.

Can I reset a Wyze camera from the app instead of the button?

Yes, for any camera currently online. Open the Wyze app, tap the camera, go to Settings, then Remove Device, and confirm. This unlinks the camera from your account and clears its Wi-Fi credentials the same way the physical button does. An offline camera can't be reset this way — you'll need the physical setup button instead.

Is it true a Wyze camera can't be reset?

For one specific model, yes. The older Wyze Cam Outdoor — the battery camera that pairs through a Wyze Base Station — has no hard reset at all, by design. Per Wyze's own support article, this is a deliberate anti-theft measure: if someone steals the camera off your wall, they can't factory reset it and re-add it to their own account. You can power-cycle it (a switch on the back) for troubleshooting, or remove it from your app account, but there's no button or app action that wipes it back to factory defaults the way every other Wyze camera allows.

Will resetting a Wyze camera delete my recorded video?

Not if that footage is cloud-stored. Clips saved under an active Cam Plus subscription live in your Wyze account, not on the camera, so a factory reset doesn't touch them. Footage saved locally to a microSD card physically stays on that card through a reset — but Wyze recommends removing the card before resetting the Battery Cam Pro specifically, since the reset process can otherwise interact with it during setup.

How to Reset a Wyze Camera (2026): Setup Button, App, and the One Model That Can't Be Reset

Quick Answer: Most Wyze cameras — the Cam v3, Cam v4, Cam Pan v3/v4, and Battery Cam Pro — factory reset the same way: hold the setup button for 10 seconds until the light turns solid yellow, per Wyze’s own support documentation, then wait up to 5 minutes for it to reboot into pairing mode. You can also reset any online camera from the Wyze app (Settings → Remove Device). The one exception is the older Wyze Cam Outdoor — it has no hard reset at all, a deliberate anti-theft feature Wyze built in so a stolen camera can’t be wiped and reclaimed by someone else. Cloud video tied to a Cam Plus subscription is never at risk from a reset either way.

Every other brand in our reset-guide series — Ring, Nest, Blink, and Arlo — gives every camera some path back to factory defaults, even if it’s awkward. Wyze is the first brand in this cluster with a model that flatly refuses.

Factory reset a Wyze Cam v3, v4, or Pan (wired/direct-WiFi)

Covers the Wyze Cam v3, Cam v4, Cam v3 Pro, and Cam Pan v3/v4 — any current Wyze camera that plugs into USB power and connects straight to your Wi-Fi.

Find the setup button on the bottom of the camera.
Press and hold for 10 seconds. The status light turns solid yellow once the reset triggers.
Release the button and wait. Per Wyze, the light starts flashing yellow and blue once the reset finishes — allow up to 5 minutes total.
Set the camera up again in the Wyze app as a new device, rejoining it to Wi-Fi from scratch.

Wyze Cam v4

Current best-overall Wyze pick, wired USB power · about $36

2.5K QHD with color night vision from a starlight sensor, plus a built-in 72-lumen spotlight.
Same 10-second setup-button reset as the rest of the wired lineup — no special reset quirks.
Worth considering as a straightforward replacement if a reset doesn't bring an aging Wyze Cam back.

Check price on Amazon →

Resetting and replacing cameras across more than one rental unit or property? A free 30-day Amazon Prime trial gets replacement cameras and microSD cards to you in two days flat instead of waiting on standard shipping.

Factory reset a Wyze Battery Cam Pro

The wire-free Battery Cam Pro uses the same setup button, but it’s tucked inside the battery compartment rather than exposed on the shell.

Remove the microSD card first, if one is installed — Wyze specifically calls this out before resetting this model.
Open the battery compartment to access the setup button.
With the camera powered on, hold the setup button for 10 seconds until the status light turns solid yellow.
Wait for the flashing yellow-and-blue light, then walk through setup again in the app, same as any new Battery Cam Pro.

Reset a Wyze camera from the app (no button needed)

Works for any camera that’s currently online — useful when the physical button is buried behind a mount or hard to reach.

Open the Wyze app and select the camera.
Tap Settings, then Remove Device, and confirm.
The camera unlinks from your account and its Wi-Fi credentials clear, same as the button reset.

An offline camera won’t respond to this — check our Wyze camera offline guide first if the app can’t see it at all.

The Wyze Cam Outdoor exception: no hard reset, by design

This is where Wyze breaks from every other brand we’ve covered in this series. The older Wyze Cam Outdoor — the battery camera that pairs through a Wyze Base Station rather than connecting directly to Wi-Fi — has no factory-reset button and no app-based wipe. Per Wyze’s own support documentation, this is intentional: if the camera is stolen off a wall or fence, whoever takes it can’t reset it and re-register it under a different account, which would defeat the point of an anti-theft feature.

What you can do with a misbehaving Wyze Cam Outdoor:

Power-cycle it — flip the switch on the back of the unit off and on. This clears temporary glitches but doesn’t touch its Wi-Fi pairing or account link.
Reboot the Base Station — unplug it, wait 5-10 seconds, plug it back in, and wait for the status light to turn solid blue.
Remove it from the app — Settings → Remove Device unlinks the camera from your account, though Wyze notes this doesn’t “reset” the hardware itself the way a true factory reset would.

If a Cam Outdoor is stuck on a problem that power-cycling and app removal can’t fix, replacement is usually the practical answer rather than chasing a reset path that doesn’t exist for this model.

It’s not just Wyze

Ring, Nest, Blink, and Arlo each split their reset process differently — Blink’s Sync-Module cameras and Arlo’s SmartHub-connected models are the closest match to Wyze Cam Outdoor’s hub-dependent setup, though even those have some reset path through the hub itself. Wyze Cam Outdoor is the only camera across this whole series with no reset path at all.

Will a reset delete your Wyze video history?

No, as long as it’s cloud-stored. Clips saved under an active Cam Plus subscription live in your Wyze account, not on the device, so a factory reset never touches them. Footage saved locally to a microSD card physically survives a reset too — Wyze just recommends pulling the card out before resetting a Battery Cam Pro so the reset process doesn’t interact with it mid-setup.

The bottom line

For most Wyze cameras — Cam v3, Cam v4, Cam Pan, Battery Cam Pro — factory reset means holding the setup button 10 seconds until the light turns solid yellow, or using Remove Device in the app if it’s online. The one camera in the Wyze lineup that breaks this pattern is the older Wyze Cam Outdoor, which Wyze deliberately built with no hard reset at all, as an anti-theft measure. Know which one you own before you go looking for a reset button that isn’t there. Still stuck after a proper reset? Our Wyze camera offline guide covers the connectivity fixes a reset alone can’t solve, and our best Wyze camera guide is the next stop if the hardware itself needs replacing.